3/31/2006
QUICK REFERENCE
Model VL300
SELECTION OF VIBRATION, BEEP, BOTH OR OFF SIGNAL (S)
Press MODE button until the CALENDAR CLOCK mode shows on the display.
Repeat pressing START/STOP button to select desired function. Icon(s) at top right of
display will indicate function:
- Vibration, Beep, Both or Off.
- A Quick Check to see what function is set, is to push the MODE button while in the
Calendar Clock mode. The function that is set will respond each time you push the MODE
button.
SETTING OF ALARMS AND COUNTDOWN TIMER
Press MODE button to rotate to the mode you wish to set. (TR for COUNTDOWN
TIMER; A1 or A2 for ALARMS) Press and Hold LAP/RESET button until the digits blink. While
digits blink, press the
START/ STOP button to advance the blinking function to the time wanted.
Press the MODE button to change from hours to minutes and advance the time by pushing
START/STOP button. For alarm settings, hour(s) and /or minute(s) can be set. For
countdown timer, seconds and/or hour(s) and minute(s) can be set. Press the LAP/RESET
button when completed. (Digits will stop blinking) In the Alarm(s) mode, the alarm
indicator icon shows which alarm is activated.
To reset Alarms & Countdown Timer for a different time, repeat
instructions as above.
Note: The calendar clock time must be set correctly for the alarm(s) to
respond accurately.
Alarm settings are activated by the time on the calendar clock.
AUTO RELOAD COUNTDOWN TIMER
When the countdown timer reaches "0", it will automatically
reload for the time that was preset. If you do not wish to start the countdown again
immediately, press the START/ STOP button twice, if the alarm is activated. Press once to
stop the countdown if the alarm is not currently activated. To restart the preset
countdown at any time, press the START/STOP button while in the TR (COUNTDOWN) mode.
HOURLY ALERT SETTING
Press the MODE button until display is in an ALARM Mode. (A1 or A2) Repeat
pressing the
START/STOP button until the Hourly Chime icon shows. (Located beside the
A2 icon)
Copyright:
Global
Assistive Devices, Inc.
Fort Lauderdale Florida USA
|
Uses and Settings "VibraLITE 3" will alert and remind you several
times per day. Numerous settings available.
Use the Repeatable Countdown Timer, 2 Alarm Settings, and an Hourly Alert
and get numerous daily reminders for Medication, Medical Conditions, Time Management,
Behavior Modification, Self Regulation, Organization)
Select Alarm Choice of Vibration, Audible or Both Vibration &
Audible
REPEATABLE COUNTDOWN TIMER
Repeating same amount of time as often as you want with no resetting.
Set the Countdown Timer for amount of time needed between reminders. Can
be set in seconds, minutes and hours.
Example: every 4 Hours for reminders for Medication. Set the countdown for
4 hours. It will automatically repeat the 4 hours countdown each time it reaches zero. No
resetting required. There will be a short, single beep or vibration to alert you at 10
minutes and then again at 5 minutes before zero.
- Other examples:
- Set for 2 minutes 30 seconds for timing procedure.
Set for 15 minutes for staying focused, test taking, stretching, changing
positions for pressure relief, checking posture, timing presentation or keeping on
schedule for patient rotation.
Set for 2 hours for reminders for bathroom trips, completing projects,
checking parking meter.
Countdown Timer can be stopped or turned off at any time when desired.
TWO ALARM SETTINGS
Two different times can be set for alarm activation during any 24-hour
period. Set Alarm One (A1) for time desired and Set Alarm Two (A2) for another time
desired.
Pre programmed times will remain set and will be activated daily when
your Alarm Settings are in the on position.
- Examples:
- Set one alarm for 7a.m wake up and second alarm for 8:15 a.m. as a reminder to leave for
work
Set one alarm for 8a.m. to take medication and second alarm for 4 p.m. for
reminder to test sugar levels.
Set one alarm for 3 p.m as reminders to pick up kids at school and second
alarm for 5 p.m as a reminder to start dinner.
Set one alarm for 9:45 a.m.appointment and second alarm for 1 p.m to check
e-mails.
Alarm(s) can be turned off when desired.
- HOURLY ALERT SETTING
- A Short, Single Beep or Vibration Reminder, every hour on the hour is given when
your Hourly Alert is ON
Hourly Alert can be turned off for Sleep or whenever it is not required.
Use for reminders to stay on track, perform tasks
- Examples of Settings:
- 7 a.m, Noon & 7 p.m.
- Set Countdown timer for 12 hours
- (at either 7a.m or 7 p.m)
- Set one Alarm for 12p.m. (Noon) Set one Alarm for 4 p.m.
- The other alarm could be used for
another daily reminder
-
- 8 a.m, Noon, 4 p.m, 7 a.m. & Noon
- Set Countdown Timer for 4 hours
- Set One Alarm for 8 a.m. as reminder and to start Countdown
- Turn Off Countdown Timer at 4 p.m
- (The other alarm could be used for
another daily reminder}
-
- Every 4 Hours during daytime only- with no resetting
- Set Countdown Timer for 8 hours
- First Time- Start Countdown Timer at 7a.m.
- It will alarm at 3p.m and at 11p.m.
- Set one alarm for 11a.m.
- Set Second Alarm for 7 p.m.
-
- 7 a.m & Noon & Every 15 Minutes
- Set One Alarm for 7 a.m.
- Set Second Alarm for 12 p.m (noon)
- Set Countdown timer for 15 minutes.
- Note: Countdown timer could be set
for any amount of time needed and would reset itself each time it reaches zero.
-
- 8 a.m, 4 p.m & 8 p.m.
- Set the Countdown Timer for 12 hours.(at either 8 a.m. or 8 p.m)
- Set one Alarm for 4 p.m.
- (The other alarm could be used for
another daily reminder)
-
Every Hour with reminder at 50 minutes
Set the Countdown Timer for One Hour
Automatic single reminder will occur at 50 minutes
(10 minutes before the hour) and again at 55 minutes
(5 minutes before the hour)
Turn off Countdown Timer when not wanted.
(Two other Alarms could be used for other daily reminders)
N.B. Hourly Alert
can be used in combination with any Alarm settings to provide additional reminders every
hour on thehour. |
